商品描述價格說明聯系我們規格PETmm有效成分含量聚對苯二甲酸乙二醇酯％加工定制否型號FC02廠商杜邦顏色本色牌號FC02加工級別注塑級特性耐磨 高抗沖 耐化學 高流動 耐高溫 抗紫外線類型標準類規格級別玻纖增強貨號U48中文名稱美國杜邦 PETPolyethylene Terephthalate (PET) Advanced Engineering Plastics產品說明：Information provided by Advanced Engineering Plastics物性信息：物理性能額定值 (公制)額定值 (英制)測試方法比重1.34 g/cc1.34 g/ccASTM D792吸水率0.10 %0.10 %ASTM D570飽和吸水率0.70 %0.70 %ASTM D570機械性能額定值 (公制)額定值 (英制)測試方法洛氏硬度（M 級）9595ASTM D785洛氏硬度（R 級）120120ASTM D785肖氏硬度 (邵氏 D)8686ASTM 2240抗張強度79.3 MPa11500 psiASTM D638伸長率 (斷裂)50 %50 %ASTM D638拉伸模量2.76 GPa400 ksiASTM D638彎曲強度103 MPa15000 psiASTM D790彎曲模量2.76 GPa400 ksiASTM D790抗壓強度103 MPa15000 psiASTM D695壓縮模量2.90 GPa420 ksiASTM D695剪切強度55.2 MPa8000 psiASTM D732懸壁梁缺口沖擊強度0.267 J/cm0.500 ft-lb/inASTM D256摩擦系數0.200.20電氣性能額定值 (公制)額定值 (英制)測試方法體積電阻率1.00e+16 ohm-cm1.00e+16 ohm-cmASTM D257介電常數3.0@Frequency 1.00e+6 Hz3.0@Frequency 1.00e+6 HzASTM D150介電強度15.4 kV/mm390 kV/inASTM D149耗散因數0.020@Frequency 1.00e+6 Hz0.020@Frequency 1.00e+6 HzASTM D150熱性能額定值 (公制)額定值 (英制)測試方法線性熱膨脹系數59.4 μm/m-°C33.0 μin/in-°FASTM D696導熱系數0.259 W/m-K1.80 BTU-in/hr-ft2-°FASTM C177熔融溫度254 °C490 °FASTM D3417最高工作溫度, Air104 °C220 °F載荷下熱變形溫度(0.46 MPa)116 °C240 °FASTM D648載荷下熱變形溫度(1.8 MPa)79.4 °C175 °FASTM D648可燃性(UL94)HBHB材料描述測試方法FDA ComplianceyesApplication fields of DuPont PET plastic raw materials in the United States:PET is mainly used for fibers, with a small amount used for films and engineering plastics. PET fibers are mainly used in the textile industry. PET film is mainly used for electrical insulation materials, such as capacitors, cable insulation, printed circuit wiring substrates, electrode slot insulation, etc. Another application area of PET film is film substrate and baseband, such as film, X-ray film, recording tape, electronic computer tape, etc. PET films can also be made into metallized films by vacuum aluminum transfer, such as gold and silver wires, micro capacitor films, etc. Another use of PET is in blow molded products, used for packaging polyester bottles, food bottles, cosmetics bottles, bottled water bottles, and so on.Glass fiber reinforced PET is suitable for the electronic, electrical, and automotive industries. It is used for various coil frames, transformers, television sets, recorder components and casings, car lampholders, lampshades, incandescent lampholders, relays, rectifiers, etc