Terluran? GP-22Acrylonitrile Butadiene StyreneINEOS Styrolution Group GmbH產品說明：Terluran GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.物性信息：基本信息特性高光抗撞擊性，良好良好的著色性流動性中等通用優良外觀用途電器用具家用貨品汽車領域的應用通用外殼玩具衛浴產品形式粒子加工方法注射成型多點數據Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Shear Modulus vs. Temperature (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)物理性能額定值單位制測試方法比重1.04g/cm3ASTM D792, ISO 1183熔流率（熔體流動速率）ASTM D1238    200°C/5.0 kg1.5g/10 minASTM D1238    220°C/10.0 kg19g/10 minASTM D1238溶化體積流率（MVR）    230°C/3.8 kg4.80cm3/10minASTM D1238    220°C/10.0 kg19.0cm3/10minISO 1133收縮率    流動0.40 到 0.70%ASTM D955    --0.40 到 0.70%ISO 294-4吸水率    飽和, 23°C1.0%ASTM D570, ISO 62    平衡, 23°C, 50% RH0.22%ISO 62硬度額定值單位制測試方法洛氏硬度 (R 級)103ASTM D785球壓硬度97.0MPaISO 2039-1機械性能額定值單位制測試方法拉伸模量2300MPaASTM D638, ISO 527-2抗張強度 (屈服, 23°C)45.0MPaASTM D638, ISO 527-2拉伸應變    屈服, 23°C2.6%ISO 527-2    斷裂2.6%ASTM D638標稱拉伸斷裂應變 (23°C)10%ISO 527-2彎曲模量2300MPaASTM D790彎曲強度65.0MPaASTM D790, ISO 178沖擊性能額定值單位制測試方法簡支梁缺口沖擊強度ISO 179    -30°C8.0kJ/m2ISO 179    23°C22kJ/m2ISO 179簡支梁無缺口沖擊強度ISO 179    -30°C100kJ/m2ISO 179    23°C180kJ/m2ISO 179懸壁梁缺口沖擊強度    -30°C59J/mASTM D256    -18°C100J/mASTM D256    23°C300J/mASTM D256    -30°C8.0kJ/m2ISO 180/A    23°C26kJ/m2ISO 180/A